Where to buy 3dB...
Click the button on the right to find your local stockist or distributor.
If you are interested in stocking 3dB please email 3dB@steelmans3d.com.
- Dampens printer vibration
- Reduces noise levels
- Retains printer output quality
- Can improve some print issues
- Economical solution
- Easy to use
- For 3D printers up to 80kg net
- Supplied as a set of 4 pieces
Noisy Printers?
3D printers can create excess noise that can be very annoying or worse, highly distracting.
Most printer noise is due to vibration generated by moving parts and motors. This vibration can transfer into any object that the printer is in contact with, such as a desk, workstation or racking. This object then acts like an amplifier for unwanted disruptive noise.
The Solution is 3dB
3dB are small anti-vibration noise reduction feet pads that help to isolate the vibration caused by the 3D printers movements and motors.
The low profile gives good stability, hence 3dB does not allow excessive shaking even when printing at higher speeds. Print quality is retained and some print issues can even be improved, such as helping to reduce ghosting/ringing.
3dB for 3D Print Farms
3dB is particularly effective for print farms with multiple 3D printers when noise levels can reach uncomfortable levels. In these situations 3dB can be truly beneficial to the working environment.
3dB Comparison Video...
- UK
- Europe
- North America / Canada
- South America
- Australia
- Africa / Middle East
- Asia
ooznest
The Yard, Old Crown Lane
Brentwood
Essex - CM14 5TA
United Kingdom
www.ooznest.co.uk
Phone: 01277 523171
STOCKISTS COMING SOON
Can't find a stockist in your area? Tell your local 3D Printing Store about 3dB.
If you are interested in stocking 3dB please email 3db@steelmans3d.com.
Imprimante 3D France
22 bis rue de la voie des bans
95100 ARGENTEUIL
France
www.imprimante3dfrance.com
Phone: (33) 1 40 85 02 28
123-3D.nl
Nieuw Walden 56
1394 PC Nederhorst den Berg
Netherlands
www.123-3d.nl
Phone: +31 (0) 294-787127
FILAMENT2PRINT
Poligono Porto Do Molle
Nave 7A
36350-Nigran (Pontevedra)
Spain
www.filament2print.com
Phone: 881 981 562
3DWare
TGS Trading GmbH
Kreuzstrasse 10
CH-8635 Durnten
Switzerland
www.3dware.ch
Phone: +41 43 501 11 33
STOCKISTS COMING SOON
Can't find a stockist in your area? Tell your local 3D Printing Store about 3dB.
If you are interested in stocking 3dB please email 3db@steelmans3d.com.
3D Universe
2833 Waterfront Ave.
Algonquin
Illinois 60102
USA
www.shop3duniverse.com
Phone: (800) 689-4344
Digit Makers
555 Edward Ave
Unit 12 Richmond Hill
Ontario L4C5K6
Canada
www.digitmakers.ca
Phone: +1(888) 635-7113
STOCKISTS COMING SOON
Can't find a stockist in your area? Tell your local 3D Printing Store about 3dB.
If you are interested in stocking 3dB please email 3db@steelmans3d.com.
STOCKISTS COMING SOON
Can't find a stockist in your area? Tell your local 3D Printing Store about 3dB.
If you are interested in stocking 3dB please email 3db@steelmans3d.com.
STOCKISTS COMING SOON
Can't find a stockist in your area? Tell your local 3D Printing Store about 3dB.
If you are interested in stocking 3dB please email 3db@steelmans3d.com.
STOCKISTS COMING SOON
Can't find a stockist in your area? Tell your local 3D Printing Store about 3dB.
If you are interested in stocking 3dB please email 3db@steelmans3d.com.
STOCKISTS COMING SOON
Can't find a stockist in your area? Tell your local 3D Printing Store about 3dB.
If you are interested in stocking 3dB please email 3db@steelmans3d.com.
3dB pads work so well, I'm gobsmacked. I've tried many, many things to reduce the travel sound of my Prusa MK2S, and these four little pads have really dampened the noise. Well done!
Timothy Reese
I've added 3dB to nearly all of my printers. They are very effective on just one printer but over the whole print farm the noise reduction is amazing! Thank you!
Joel T.
I've had a printer running for 2 hours and with 3dB couldn't even hear it running from my office. Usually I can hear the Z end-stop ping at the start of a print but I couldn't even hear that.
Oliver W.
You didn't tell me that 3dB pads were going to be this bloomin good! So easy to use and they take less than a minute to add to a printer.
David Wood